Home ProductsCommercial Indoor Led Lighting

Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V

Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V

  • Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V
  • Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V
  • Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V
Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V
Product Details:
Place of Origin: China
Brand Name: ZLONE
Certification: CE ROHS TUV SGS UL SAA
Model Number: ZLP031240WD
Payment & Shipping Terms:
Minimum Order Quantity: 1pc
Price: Negotiable
Packaging Details: 5pcs/CTN G.W:25KGS 131*41*25cm/CTN White/Silver Frame
Delivery Time: 5-7working days
Payment Terms: T/T, Western Union
Supply Ability: 30,000pcs/month
Contact Now
Detailed Product Description
Power: 40W Size: 295x1195x10mm
Material: Aluminium Frame + Pmma Lgp Dimming Way: 0-10v Dimming
Lumenius Flux: 3400-3600LM CRI: >80
CCT: 2800-6500K IP Rating: IP44
High Light:

ultraslim led panel

,

led ceiling panel light

1-10v dimmable led panel 60x60cm led panel light 1-10v dimming panel light

 

 

0-10v,1-10v dimming pane light 30x120cm 40w 3600lm TUV ETL certificated panel

 

Features of Dimmable led panel 
1. Light distribution design: front light, high brightness, mixed evenly.
2.  waterproof, Prevent lampblack, dustproof, anti-mosquito
3. Luminance decrease control No more than 3% control: 2000 hours
4. LED selection:SMD 2835 Hight lumens.
5. Driven design: adopting the designed with high efficiency constant current drive power supply.
6. Product quality: all products before they leave the factory after several strict 
7. Pure white.warm white , cool white ,Red,Green Bule, Yellow,and RGB available.
8.200*200mm,300*300mm,300*600mm,300*1200mm,600*600mm,600*1200mm available.
9.Energy saving, Environmental friendly
10.Light and Soft, no electric wave,no RF interference.
11. Can be dimming
12.Long service life over 50000 hours
 
Our advantages of Dimmable led panel 

  • Conforming to CE RoHs
  • Environment-friendly and no UV or IR radiation.
  • Extruded aluminum is good at heat dissipation, surface temperature usually stay below 65°. 
  • Wide range of available operating voltage and low consumption.
Specifications of 0-10vDimmable led panel 40w 300x1200mm

 

Item

Model No.

ZLP031240WD

  Optical

Light Source

LED 2835 epistar

Color Temperature

2800-6500K

Luminous Flux 

3400-3600LM 

Color Render Index

Ra > 80

Beam Angle

120

Optical Decay Rate 

 Less than 3% in 3000 Hours

Service Life 

≥ 50000 Hours

Electric

Input Voltage

AC 100~240 V/DC24V

Frequency 

50  ~  60 Hz

Power  Consumption 

40W

Power Factor

PF>0.95

Starting Time 

≤ 1.2 S (@ 110Vac)

Withstand Voltage

3000Vac/1Min

 Structure

Materials

Aluminum, PMMA LGP, PC diffuser

Temperature Rising

< 20  

Dimensions

1195*295*10 MM

Net Weight

4.7Kg / piece

Protection class (IP)

IP44

Others

Working Temperature/Humidity

 -20   ~  +50 ; 10%  ~  80% R.H.

Storage Temperature/Humidity

 -40    ~ +80  ; 10%  ~  80% R.H.

Certificate

CE,TUV,CB,SAA

Environmental Protection

RoHS  

 

 

Intruduction about TRIAC DIMMING PANE LIGHT 
 

1-10V (0-10V) dimming LED panel light
1-10v (0-10 V) is one of the earliest and simplest electronic lighting control signaling systems; simply put, the control signal is a DC voltage that varies between zero and ten volts. The controlled lighting should scale its output so that at 10 V, the controlled light should be at 100% of its potential output, at 1v it should be at minimum output, and at 0 V it should at 0% output (i.e. “Off”). Dimming devices may be designed to respond in various patterns to the intermediate voltages, giving output curves that are linear for: voltage output, actual light output, power output, or perceived light output. 
Some knowledge about 1-10v dimming solution:
There are two variations to the 0 to 10 V system, 0 to -10 V and 0 to +10 V. Despite being incompatible with each other, both systems were widely implemented by lighting manufacturers.
Dimming fluorescent ballasts and dimming LED drivers often use 0-10 V control signals to control dimming functions. In many cases, the dimming range of the power supply or ballast is limited. If the light output can only be dimmed from 100% down to 10%, there must be a switch or relay available to kill power to the system and turn the light completely off.
Most 0-10 V controllers offer either a built-in line voltage relay or an external line voltage relay. Depending on the application, these options should be considered.
In production lighting this system was replaced by analog multiplexed systems such as D54 and AMX192, which themselves have been almost completely replaced by DMX512. For dimmable fluorescent lamps (where it operates instead at 1-10 V, where 1 V is minimum and 0 V is off) the system is being replaced by DSI, which itself is in the process of being replaced by DALI.

When using this system, one must take into consideration the actual application, since controlling office lights is not the same as controlling theatrical lighting. 0-10 V lighting control is widely used in commercial and industrial lighting by ballast manufacturers such as GE, , Universal, Metrolight, and Sylvania. There are distributed control approaches on the market today that can be installed inside or very near the fixture(s) to be controlled thus eliminating the wire runs and the voltage drop. 
Advantages and disadvantages

The simplicity of the lighting system makes it straightforward to understand, implement and diagnose, and its low current (typically 1 mA) means it can be run along relatively thin cables with little voltage drop. However, since it requires one wire per control channel (plus a common return wire), a sophisticated system could have hundreds of wires, requiring expensive multicore cables and connectors. Over a long cable, the voltage drop requires every channel of the receiving device to be calibrated to compensate for the voltage losses. (This is only a theoretical limitation as the resistance of the thinnest practical wire is around 20 Ω/1000 m.) Interference from nearby ac power cables can affect the signal to the fitting and even cause flickering. Signal wire running parallel to power cables for a fair distance would need to be screened.

 

Installation of led panels 1-10V & 0--10V dimming

Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V 0

 

Trailing edge dimmers led panel light for home with 120 Beam Angle AC 100 - 240 V / DC24V 1

 

Contact Details
SHENZHEN ZLONE LIGHTING CO.,LTD

Contact Person: Mr. Antony Liao

Tel: +8613430998017

Send your inquiry directly to us (0 / 3000)

Other Products