|Place of Origin:||China|
|Certification:||CE ROHS TUV SGS UL SAA|
|Minimum Order Quantity:||1pc|
|Packaging Details:||N.W:1.45kgs 5pcs/CTN G.W: 8KGS 41*41*25cm/CTN White/Silver Frame|
|Delivery Time:||5-7working days|
|Payment Terms:||T/T, Western Union|
|Material:||Aluminium Frame + Pmma Lgp||Dimming Way:||PWM Dimming With Remote Controller|
ultraslim led panel,
led ceiling panel light
36W pwm dimmable panel 30x30cm, remote dimmable panel lighting cri>80 2800-6500k
PWM Dimming LED light panel
Pulse-width modulation (PWM), or pulse-duration modulation (PDM), is a commonly used technique for controlling power to inertial electrical devices, made practical by modern electronic power switches.
The main advantage of PWM is that power loss in the switching devices is very low. When a switch is off there is practically no current, and when it is on, there is almost no voltage drop across the switch. Power loss, being the product of voltage and current, is thus in both cases close to zero. PWM also works well with digital controls, which, because of their on/off nature, can easily set the needed duty cycle.
Some knowledge about PWM dimming :
The average value of voltage (and current) fed to the load is controlled by turning the switch between supply and load on and off at a fast pace. The longer the switch is on compared to the off periods, the higher the power supplied to the load is.
The PWM switching frequency has to be much faster than what would affect the load, which is to say the device that uses the power. Typically switchings have to be done several times a minute in an electric stove, 120 Hz in a lamp dimmer, from few kilohertz (kHz) to tens of kHz for a motor drive and well into the tens or hundreds of kHz in audio amplifiers and computer power supplies.
The term duty cycle describes the proportion of ‘on’ time to the regular interval or ‘period’ of time; a low duty cycle corresponds to low power, because the power is off for most of the time. Duty cycle is expressed in percent, 100% being fully on.
PWM has also been used in certain communication systems where its duty cycle has been used to convey information over a communications channel.
All models for PWM Dimming
|Model & Picture||Power||Dimension||Input Voltage||Body Material||LED Qty/Type||CCT||Lumen Flux||Beam Angle||CRI||IP Rating||Power Factor|
||595*595*10 (mm)||100-260V AC 50/60Hz
TRIAC DIMMABLE DRIVER CE/ROHS
|6063 Aluminium &
Cut-out size: 160mm
Cut-out size: 220mm
Cut-out size: 280mm
Contact Person: Mr. Antony Liao